Manually operated Setting
Configuration a connection environment for the internet service
a. Select ‘Start -> Setting -> Control Panel -> Phone and Modem options’
b. Input a name for the computer you are dialing, select the modem, “LGE CDMA USB
Modem”, installed above, and press ‘Properties…’.
c. Select the port connected to WLL phone as a communications port.
The phone is connected to the USB bus. Independent of Maximum speed value it can hit
the 12Mbps shared by all other devices. This Maximum speed item doesn’t have any
effect on communication between the Phone and PC. So you don’t have to specify the
d. Select ‘Connection Port Speed ’, and press ‘Advanced’. Input commands (for example,
AT+CRM, $LGPKT, AT$LGQNC) that inform the WLL phone of the interface protocol
that will be used. And press ‘OK’. You need to combine commands for high speed
packet data service.
Dialing and getting an Internet service started
a. Open the new connection made above.
Select ‘Start -> Control panel -> Network Connections
And ‘Make New Connection’ by Double Click New Connection Wizard
b. Welcome to the New Connection Wizard -->Next
c. Connect to the Internet
c. Select Set up My Connection manualy
d. Select Network Connection Type = Connect using a dial-up modem
d. Select Modem Wifone
e. You are input to special name for this connection (Ex. Wifone), and
Press " Next "
e. Input Phone number to dial --> *777
f. You are input in a user name, password and the dial number of the service
provider. And press ‘Next’
User name : wifone
Password : wifone
Confirm Password : wifone
g. Finally, press Finish
h. Connect to your Connection
i. Check your username and password in service provider system.
And Start in Internet Service or Packet Service.
k. Repeatedly, if you want connect in Data Service, Double click ‘Dial-up Connection’
(you made special name above)
Semoga bermanfaat, terimakasih atas waktunya...cu.